Programming Procedure; Eeprom Memory - Thrustmaster T.Flight Stick X User Manual

PROGRAMMING PROCEDURE

Steps
Enable MANUAL PRESET (8)
1
2 Press and release the MAPPING button.
3 Press and release the button or direction to program.
Press and release the button or direction onto which you
4
Your "MANUAL PRESET" is now enabled and up to date

EEPROM MEMORY

• Your joystick features an internal chip which saves all of your "MANUAL PRESET"
programming in memory (even when the joystick is switched off or unplugged for a long
period of time).
• You can save a different "MANUAL PRESET" for each platform used (one for PC and one
for PlayStation® 3).
ERASING A "MANUAL PRESET"
Steps
1 Enable your MANUAL PRESET (8).
Press and hold the MAPPING button
2
(and once again identical to the "AUTOMATIC PRESET").
RETURNING TO "FACTORY SETTINGS"
You can erase all of your programming or settings carried out on both PC and
PlayStation® 3 with a single step:
Step
Simultaneously press the buttons
1
MAPPING + 11 (SE) + 12 (ST)
All of your "MANUAL PRESETS" (PC + PS3) or settings are now blank.
Note: This operation will completely restart your joystick
(on PC, we therefore recommend that you do this outside of games).
All manuals and user guides at all-guides.com
Action
by pressing the button.
wish to place your function.
(with your programming carried out).
Action
for 2 seconds.
Your "MANUAL PRESET" is now blank
Action
8/12
LED
GREEN
OFF
FLASHES GREEN
GREEN
LED
GREEN
FLASHES GREEN
2 SECONDS
LED
FLASHES GREEN/RED
2 SECONDS