Canceling Hot Cue points
Cancel a Hot Cue point by pressing its
key while holding down the
CLEAR
Using and confirming Hot Cue points
When Flash Start is off, you can jump to a Hot Cue
point and pause playback by pressing a
key. If you press and hold down that
again, playback continues from that HOT Cue point
until you release the key.
When you release the
HOT CUE
Flash Start
Use the
keys for instant playback from
HOT CUE
their cue points when the Flash Start function is on.
Turn the Flash Start function on and off with the
Setup menu FLASH item (the default setting is on).
When Flash Start is on, the FLS indicator appears on
the display.
Loop playback
Use this function to loop playback of any section of
an audio CD between set IN and OUT points.
Setting the IN point
Press the
key while the CD is playing or paused.
IN
The
key will light up and the
IN
Setting the OUT point
Press the
OUT
key while the CD is playing or
paused. The
IN
,
OUT
and
RE-LOOP/EXIT
all light up.
Loop playback will start immediately if the OUT
point is set while the CD is playing.
Setting the OUT point while the CD is paused moves
the pause position to the IN point. Push the
PAUSE
key to begin loop playback.
Canceling loop playback
Press the
RE-LOOP/EXIT
to exit the loop mode and resume normal playback.
The key's light will turn off, but the loop IN and
OUT points will not be cancelled.
HOT CUE/
key.
SHIFT
HOT CUE
HOT CUE
key
key, playback paus-
key will flash.
OUT
keys will
PLAY/
key during loop playback
5- DJ functions
Opening the CD cover also cancels the Hot Cue
points.
es and the playback position is reset at the Hot Cue
point. Hot Cue points can be confirmed using this
function.
To resume normal playback, press the
key during playback while holding down a
key.
The following procedure explains how to set and play
a loop section with starting (IN) and ending (OUT)
points.
During loop playback, as soon as the OUT point
is reached, playback restarts instantly from the IN
point.
NOTE
The OUT point can only be set at a time following
the IN point.
The OUT point can be set to create a loop that
spans more than one track.
Using a
SKIP
,
CUE
or
HOT CUE
rent location outside the looped section will also exit
loop playback mode. The
RE-LOOP/EXIT
will turn off, but the loop points will not be canceled.
PLAY/PAUSE
HOT CUE
key to set the cur-
key light
1
TASCAM CD-DJ1