Advertisement
Quick Links
How to set up Wireless on Technicolor 7200.20 DOCCSIS 3 Modem
1. Open a Browser and type http://192.168.0.1 in the address bar, leave the
user empty and type "admin" as the password then click OK
Note: You might have a problem when using IE, try using another browser.
Advertisement
Related Manuals for Technicolor 7200.20 DOCCSIS 3
Summary of Contents for Technicolor 7200.20 DOCCSIS 3
- Page 1 How to set up Wireless on Technicolor 7200.20 DOCCSIS 3 Modem 1. Open a Browser and type http://192.168.0.1 in the address bar, leave the user empty and type “admin” as the password then click OK Note: You might have a problem when using IE, try using another browser.
- Page 2 2. Click Wireless > at Radio check following parameters: 2.1 Interface -> Enable or Disable Wireless...
- Page 3 3. Primary Network for setting Wireless SSID Security, check following: 3.1 Network Name (SSID) > Wireless signal 3.2 How to set up Wireless parameters as shown...
- Page 4 1. Primary Network select Disable WPA-PSK and WPA2-PSK 2. WEP Encryption > select Security WEP (64-bit) or WEP (128-bit) 3. Network Key > set the pass code to use Wireless 4. When finish click Apply to save setting...
- Page 5 WPA-PSK, WPA2-PSK 1. For Primary Network, select Disable at WEP Encription 2. To use only WPA-PSK, select Disable at WPA2-PSK 3. To use only WPA2-PSK, select Disable at WPA-PSK 4. To use both WPA-PSK and WPA2-PSK, select Enable both. By Default both parameters are Enable 5.