Repeat Playback; Program Playback - Tascam DA-302 Owner's Manual

6-5. Repeat playback

This function allows one or all programs to be played back
repeatedly.
·With one program repeat, the tape is automatically
rewound to the previous Start ID when a Start ID is
detected.
·For all program repeat, the tape is automatically
rewound to the beginning when the tape end is reached
or the End ID is detected.
1
Select the deck with the SELECT 1/2 key.
2
Press the MENU key to show the following menu in
the time display.
Repeat1
3
Set to "Single" with the UP/DOWN key to engage the
One Program Repeat mode. Set to "All" to engage the
All Program Repeat mode.
... If the STANDBY key is set to ON in the One Program
Repeat mode, the Play-Pause mode is engaged at the
beginning of the program after one program has been
played.

6-6. Program playback

This function allows you to play back programs in a user-
specified sequence.
1
Select the deck with the SELECT 1/2 key.
2
Press the MENU key to show the following menu in
the time display.
PGM1
3
Enter the program number of the program you want to
play first with the UP/DOWN key.
PGM1
4
To program the program you want to play back second,
first press the > key and set the step number to "s02".
PGM1
5
Enter the program number of the program you want to
play back second with the UP/DOWN key.
PGM1
Off
s01_EE
s01_03
s02_EE
s02_05
6
Up to 50 programs can be programmed in the same
way.
7
Press the EXECUTE key to start Program Playback.
... The last step is the step before the step in which "EE" is
shown in the program number input section on the
menu.
e.g.) In case of [ PGM1
is the last step.
... Checking the programmed sequence
Each time the > key is pressed while the program
menu (e.g.: [ PGM1
step number changes, allowing you to check the pro-
gram number.
(By pressing the > key while pressing the SHIFT key,
you can check the previous step number.)
... Adding to or changing the programmed sequence
To add a program number, display the step number with
"EE" and enter the program number. Adding a program
number in the middle of the program sequence is not
possible.
To change the program number, display the program
number to be changed by pressing the > key and enter
a new program number with the UP/DOWN key.
·To enter "EE", press the UP key and DOWN key
simultaneously or the CLEAR key on the remote
control unit.
Section 6 : Playback
s03_EE ], step 02 (s02)
s01_03 ]) is displayed, the
19