Attaching/Detaching The Lens - Panasonic Lumix H-ES200 Operating Instructions Manual

Note
• Operational sound may be recorded when Auto Focus is
operated while recording a motion picture. If the sound
bothers you, we recommend performing recording with a
function such as Manual Focus (MF) to lock the focus.
• If you set the O.I.S. to [ON] when recording a motion
picture, operating sounds may be recorded. If they
become bothersome, we recommend setting the O.I.S.
switch to [OFF] and mounting the camera on a tripod.
∫
1.4k Teleconverter
2 3
1

Attaching/Detaching the Lens

For information on how to attach and remove the lens,
refer to the operating instructions for your digital
camera.
• Before attaching or detaching the lens, check that the
digital camera is turned off.
6
DVQX1304
1 Fitting mark
2 Lens release
button
3 Lens fitting mark
4 Contact points
5 Lens mount rubber
4 5
• Before attaching the lens to the
digital camera, remove the lens
rear cap. ( 1 , 2 )
• To prevent dust and other particles
from accumulating on or entering
the lens, be sure to attach the lens
cap/lens rear cap after detaching
the lens from the digital camera.
∫
Attaching Filters
• If you use two or more filters at the same time, part of a
recorded image may darken.
• It is possible to attach the lens cap or the lens hood with
the filter already attached.
• It is not possible to attach a conversion lens or adaptor to
the lens surface and use it in combination with this lens.
Do not attach any items other than filters. Doing so may
result in lens damage.
∫ Attaching the Lens Hood
1 Rotate the lens hood
screw in the direction of
the arrow to loosen it ( 1 ).
2 Insert the lens hood until
it stops (2).
3 Rotate the lens hood
screw in the direction of
the arrow to fasten the
lens hood securely (3).