Precautions - Panasonic Lumix H-ES200 Operating Instructions Manual

-If you see this symbol-
Disposal of Old Equipment
Only for European Union and countries with recycling
systems
This symbol on the products, packaging, and/or
accompanying documents means that used
electrical and electronic products must not be
mixed with general household waste.
For proper treatment, recovery and recycling of
old products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.

Precautions

∫
Lens Care
• This lens has a dust-proof and splash-proof construction.
When using it, please be careful of the following.
If the lens is not working properly, consult the dealer or
your nearest Service Centre.
– Please attach the lens to a dust-proof and splash-proof
digital camera. The lens is not designed to be dust-proof
and splash-proof when attached to a digital camera
without dust-proofing and splash-proofing.
– When attaching or removing the lens, be careful so that
foreign materials such as sand, dust, and water droplets
do not adhere to or enter the lens mount rubber, contact
points, digital camera and lens.
– This lens is not waterproof and cannot be used to record
underwater. For splash-proofing, the lens is constructed
to resist the entry of water. If splashes of water etc. do
adhere to the lens, wipe after use with a soft dry cloth.
• To improve the dust-proofing and splash-proofing of this
lens, a lens mount rubber is used in the mounting portion.
After changing the lens a number of times, you may find
that the lens mount rubber has marked the mount portion
of the digital camera body, which does not affect its
performance.
For information on changing the lens mount rubber,
contact your nearest Service Centre.
• Do not press the lens with excessive force.
• When there is dirt (water, oil, and fingerprints, etc.) on the
surface of the lens, the picture may be affected. Lightly
wipe the surface of the lens with a soft, dry cloth before
and after taking pictures.
ENGLISH
3
DVQX1304