Function
Picture Initialization Function
* The settings for each input and Picture Mode are reset to the factory defaults.
1. Press the MENU button, then go to Picture with the ∧, ∨, <, >
buttons and press OK ◉.
2. Press the ∧, ∨ buttons to go to Picture Reset and press OK ◉.
3. Press the <, > buttons to select Yes and press OK ◉.
ꔈ Press the BACK button to exit the menu screen.
TruMotion Demo Function
* You can preview the live scan function.
1. Press the MENU button, then go to Picture with the ∧, ∨, <, >
buttons and press OK ◉.
2. Press the ∧, ∨ buttons to go to TruMotion Demo and press
OK ◉.
ꔈ This is not available for RGB input.
ꔈ Press any button to exit TruMotion Demo.
ꔈ Press the BACK button to exit the menu screen.
Screen Function
Using the Pause Function
1. Press the PAUSE button on the remote control.
* You can temporarily stop a video being played.
<Playback Screen>
2. To clear the pause function, press the PAUSE button once again.
* The pause function is automatically cleared after 10 minutes.
24
<Pause Screen>
PICTURE
Picture Mode
: Vivid
• Contrast
100
• Brightness 50
• Sharpness
80
• Color
60
• Tint
0
• Advanced Control
• Picture Reset
ꔍ
PICTURE
▲
• Contrast
100
• Brightness 50
• Sharpness
80
• Color
60
• Tint
0
• Advanced Control
• Picture Reset
TruMotion Demo
ꔂ Move ꔉ OK
R
G
ꔂ Move ꔉ OK
R
G