Installing A Wru-806A/Wru-806B Tuner Unit - Sony MB-806A Operating Instructions Manual

Installing a WRU-806A/WRU-806B Tuner Unit

Up to six WRU-806A/WRU-806B UHF Synthesized
Tuner Units can be installed.
Notes
• Be sure to power this unit off before installing the
WRU-806A/WRU-806B.
• The buttons and display on the front panel of the
WRU-806A/WRU-806B may be damaged if they are
gripped too strongly. Always hold the WRU-806A/
WRU-806B by the side.
• Do not touch the connectors on the rear panel of the
WRU-806A/WRU-806B.
• Be careful of static electricity.
Installing a WRU-806A/WRU-806B
1
Hold the WRU-806A/WRU-806B by the side and
insert into the slot. Push in until you hear a click.
2
To install two or more units, detach the necessary
number of blank panels by pushing in the top and
bottom tabs of each panel and pulling the panel
out. Then do step 1 for each unit.
6
(GB)
Removing a WRU-806A/WRU-806B
On the bottom panel of the tuner, locate the lever
corresponding to the slot where the WRU-806A/
WRU-806B is installed and pull the lever forward.
The WRU-806A/WRU-806B is ejected from the slot.
Bottom Panel
Lever