Connection
5.8 Disconnect the spring-loaded terminal (push-in)
5.8
Disconnect the spring-loaded terminal (push-in)
Hazardous voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
● Screwdriver DIN 5264 of the size 0.5 x 3 mm
Procedure
Step
Instructions
1
Insert the screwdriver into the rectangular
opening of the spring-loaded terminal until it
engages.
2
Remove the cable from the oval opening.
3
Remove the screwdriver.
44
WARNING
Figure
Manual, 09/2019, A5E31947765002A/RS-AC/003
3RP25 Time Relays