Advertisement
Available languages
Available languages
Industrial PC
SIMATIC IPC547G - Windows 7 Ultimate, 32-bit, MUI
Product Information
Validity
The information in this product information takes precedence over statements in the basic operating instructions, the release
notes and online help.
This product information is valid for IPC547G.
The SIMATIC IPC547G is now available as a version with an additional operating system option: Windows 7 Ultimate, 32-bit,
MUI.
This product information describes special considerations that you must take into account when using Windows 7 Ultimate,
32-bit.
The documentation for the standard device is available on the Internet at:
Documentation IPC547G (https://support.industry.siemens.com/cs/ww/en/ps/23710/man).
Installation of Windows 7 Ultimate, 32-bit
Windows 7 Ultimate, 32-bit - Legacy mode (MBR storage device)
NOTICE
MBR storage device size
in Legacy mode, storage devices up to a maximum size of 2 TB are supported.
Using the Trusted Platform Module TPM 2.0
Unlike with Windows 7 Ultimate, 64-bit, the Trusted Platform Module TPM 2.0 can not be used under Windows 7 Ultimate,
32-bit.
Requirement
You need the Recovery DVD for the operating system you want to install. The recovery DVD is included in the scope of
delivery if you have configured a device with an operating system.
If you use storage controllers that are unknown to the operating system, for example a RAID or AHCI controller, copy the
respective controller driver to a USB stick and keep this USB stick on hand. The controller driver is required during the
installation process.
4
© Siemens AG 2017. All rights reserved
A5E42356221-AA, 07/2017
Advertisement
