Headset Level Settings - TANDBERG Compass User Manual

4 Administrator Settings

4.5.1 Headset Level Settings

Headset mic
It is possible to adjust the headset microphone input level according to the sensitivity of the used
headset. The on-screen audio level indicator will make it easier to set the correct input level
settings. The input level should be adjusted so that the average level reaches within the yellow
area, preferably in the middle. The headset microphone input level are adjustable in steps of 1.5
dB from 0 dB to 22.5 dB.
Headset out
It is possible to adjust the audio output level to the headset loudspeakers.
Figure 4-17. Headset level settings menu.
Note that the system has separate volume settings for loudspeaker and headset output. The
volume keys on the remote control also adjust the level of the headset output when the headset is
activated by pressing the push-button, without changing the volume setting you have for the
loudspeaker. When changing back to the loudspeaker, you will get the volume settings you had
before you activated the headset.
107