Introduction - TANDBERG D1320203 User Manual

TANDBERG 3G Gateway Data port Command Interface User Guide
1.

Introduction

The TANDBERG 3G Gateway Data port Command Interface User Guide contains guidelines on how to use
the textual command interface supported by the 3G Gateway system, further referred to as 3G Gateway. The
Data port Command Interface can be accessed through Telnet via the LAN interface or through RS-232 by
connecting a serial cable to the serial interface connector, referred to as the Data port (ref. chapter 2). Three
Telnet sessions can be connected to the 3G Gateway at the same time in addition to the RS-232 connection.
If, after reading this manual, you require additional information concerning the use of the TANDBERG 3G
Gateway Data port Command Interface, please contact your local TANDBERG dealer who will be able to
supply you with relevant information for special applications.
D1320203 3