Table of Contents
Advertisement
Control Panel > Call Quality Settings
Call Quality Settings – an Overview
GETTING TO THIS MENU
Press OK
to produce the below menu.
Use the Arrow
keys to move to the
Control
Panel and press OK.
Use the Arrow keys to move to Call
Quality, if applicable. Press OK.
LOST IN
TRANSLATION? Click on the Phone
Book icon 5 times followed by pressing
the number key 1 on the remote control to
reset the menu language to English.
D 13954.01
MAY 2006
AUDIO ALGORITHM
The system will automatically select the best audio
algorithm based on the call rate and the capabilities
of the remote system. Use this menu to disable audio
algorithms in case you want to remove "low quality"
audio, or if you have interoperability issues calling
other systems.
VIDEO ALGORITHM
The system will automatically select the best video
algorithm based on the video source and the capabili-
ties of the remote system. Use this menu to disable
video algorithms in case you have interoperability
issues calling other systems.
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE
Select this icon and press
OK to leave the menu putting
changes into effect.
85
TANDBERG 1700
USER GUIDE
AAC-LD 128
Specify a call rate for 128kbps
AAC-LD. From
this call rate and above, "128kbps AAC-LD"
is available. On lower call rates "64kbps AAC-
LD" is available.
NATURAL VIDEO
Choosing Natural
Video will enable 60 fields
per second true interlaced picture for high mo-
tion video. The use of Natural Video requires
the H.263+ and H.263++ video protocols.
Natural video will be disabled in H.323 Multi-
Site calls and in H.320 Continuous Presence
MultiSite calls. Recommended setting is Auto.
MAX UPSTREAM RATE
The Max Upstream
Rate (kbps) defines the
desired maximum transmitted call rate. This
is to be able to limit the outgoing bandwidth
whilst keeping the maximum incoming band-
width, particularly useful for home offices
with different upstream and downstream
rates, typically ADSL.
VIDEO QUALITY
The different video sources need different
Video Quality
Settings. Main Camera, VCR,
AUX and Split Screen have Motion as default.
PC, Document Camera and VNC have Sharp-
ness as default.
DEFAULT CALL SETTINGS
Default Call Settings are connected with Call
Settings in the call menu. If you leave Call
Settings unchanged when making a call, the
system will use the Default Call
Settings in
the call.
MXP
Advertisement
Table of Contents
