Sony Trinitron KV-AR212M83 Service Manual page 101

continued
The selected channel will appear on
the screen.
2) Press 2 +/– to select the new
program number position for your
selected channel, then press t.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4
Press 2 +/– to adjust the bars on the top
and bottom of the menu if they are slanted,
then press t (KV-AR212M61 only).
If no adjustment is necessary, then press t.
5
Press 2 +/– to select "No", then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
"Yes", then press t.
Tips
• You can immediately go to the end of the "Initial Setup" menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
five seconds or using the menu system (see page 15).
8
Installation
Program Sorting
Program:
01
01
02
03
04
Select new position