Advertisement
1-3.
Settings after Installation
Check procedure
1. While pressing the [PAGE/HOME] button and the [SHIFT] button simultane-
ously, press the [MENU] button.
The MAINTENANCE MENU is displayed.
2. Rotate the [PUSH|SET] knob to select M2: SERVICE SUPPORT, and press the
[PUSH|SET] knob.
3. Rotate the [PUSH|SET] knob to select M22: OPTION STATUS, and press the
[PUSH|SET] knob.
4. Confi rm that "ena" is displayed in the place corresponding to SD REC&PB, 24P
REC&PB and Linear Edit.
n
For more detailed information on the Maintenance Mode, refer to the PDW-HD1500
Operation Manual or the Maintenance Manual Volume 1.
PDBK-L1500
MAINTENANCE MENU
MAINTENANCE MENU
M0:CHECK
M0:CHECK
M1:ADJUST
M1:ADJUST
M2:SERVICE SUPPORT
M2:SERVICE SUPPORT
M3:OTHERS
M3:OTHERS
M4:SETUP MAINTENANCE
M4:SETUP MAINTENANCE
M5:NETWORK
M5:NETWORK
M6:DRIVE
M6:DRIVE
OPTION STATUS
OPTION STATUS
SD REC&PB
SD REC&PB
24P REC&PB
24P REC&PB
MPEG TS Board
MPEG TS Board
Linear Edit
Linear Edit
TO MENU : MENU KEY
TO MENU : MENU KEY
: ena
: ena
: ena
: ena
: ---
: ---
: ena
: ena
1-5 (E)
Advertisement
