Cleaning The Shaver Under The Tap - Philips 9000 Series Manual

Cleaning the shaver under the tap

2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning fluid.
You can safely pour the cleaning fluid down the
sink.
3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull off
the seal.
5 Place the cleaning cartridge in the SmartClean
system.
6 While holding the SmartClean system with one
hand, gently push the top part of the
SmartClean system back down ('click').
Clean the shaver after every use for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
1 Switch on the shaver.
27
English