3. Install the Cover.
4. Follow the procedure in
Optical drive
Removing optical drive assembly
1. Follow the procedure in
2. Remove the:
a)
Cover
3. To remove the slim optical drive:
a) Disconnect the data cable and power cable from the connectors on the optical drive assembly [1].
NOTE:
You must unroute the cables from the tabs under the drive cage to allow you to disconnect the cables
from the connectors.
b) Remove the two (M2x2) screws that secure the optical drive assembly to the computer [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
33