Powering Your Phone On/Off; Setting Up Your Phone For The First Time - Zte Blade 10 User Manual

2. Connect the charger to a standard AC power outlet. If the phone
is on, you'll see a charging icon, such as
status bar.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the
phone even when it is being charged. In this case, try again after
charging the phone for at least 20 minutes. Contact customer service
if you still cannot power on the phone after prolonged charging.

Powering Your Phone On/Off


Press and hold the Power key to turn on your phone.

To turn it off, press and hold the Power key to open the options
menu and touch
NOTE:
If the screen freezes or takes too long to respond, try pressing and
holding the Power key for about 10 seconds to restart the phone.

Setting Up Your Phone for the First Time

When you first power on your phone after you purchase it or reset it
to factory settings (see
before using it. Select the language and then follow the prompts to
set up your phone.
> .
Reset Options), you will need to set it up
16
or , appear in the