About Provisioning Mode - Honeywell ScanPal EDA51 Series Quick Start Manual

About Provisioning Mode

After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a bar code to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
Scan a Bar Code with the Scan Demo
For optimum performance, avoid reflections by scanning the
bar code at a slight angle.
1. Swipe up on the screen.
Select Demos > Scan
2.
Demo.
3. Point the computer at
the bar code.
4. Touch Scan on the
screen or press and
hold any Scan button.
Center the aiming beam
over the bar code.
The decode results appear on the screen.
Note: In the Scan Demo app, not all bar code symbologies are enabled
by default. If a bar code does not scan, the correct symbology may
not be enabled. To learn how to modify the default app settings,
see the User Guide.
15