Hitachi WR 12DAF Handling Instructions Manual page 7

10. Always charge the battery at a temperature of 0 –
40°C.
A temperature of less than 0°C will result in over
charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that
of 20 – 25°C.
11. When one charging is completed, leave the charger
at least 15 minutes before the next charging of
battery.
Do not charge more than two batteries
consecutively.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Capacity
Tightening torque
Rechargeable battery
Weight
CHARGER
Model
Charging time
Charging voltage
Weight
STANDARD ACCESSORIES
1. Charger (UC12SD or UC14YFA) ............................... 1
2. Plastic case ................................................................ 1
Standard accessories are subject to change without
notice.
Maximum
Tightening is M12 high tension bolt (strength grade 12.9), when fully
charged at 20°C temp.
Tightening time: 3 sec.
EB1214L: Ni-Cd battery, 12 V (1.4 Ah, 10 cells)
EB1220BL: Ni-Cd battery, 12 V (2.0 Ah, 10 cells)
EB1226HL: Ni-MH battery, 12 V (2.6 Ah, 10 cells)
UC12SD
EB1214L: Approx. 60 min. (at 20°C)
12 V
1.4 kg
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
16. Do not insert object into the air ventilation slots of
the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
17. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
18. Using an exhausted battery wil damage the charger.
MODEL
WR12DAF: with charger and case
WR12DAF
0 – 2200 min –1
M6 – M14 (Ordinary bolt)
M6 – M10 (High tension bolt)
110 N·m {1120 kgf·cm}
1.6 kg
EB1220BL: Approx. 50 min. (at 20°C)
EB1226HL: Approx. 60 min. (at 20°C)
OPTIONAL ACCESSORIES
(Sold separately)
1. Battery (EB1214L, EB1220BL, EB1226HL)
English
UC14YFA
7.2 – 14.4 V
0.6 kg
6