Table of Contents
Advertisement
4.5.2
Effective ranges editor
Work area
In WinCC flexible ES, open the "Effective Ranges" work area in the project window under
"Device Settings" by double-clicking on "Effective Ranges".
The work area provides a tabular view of the effective ranges and their transponders.
Configuring
The configuration consists of the following tasks:
1. You create the effective ranges by specifying the "Name", "Display name" and "ID".
2. You configure a transponder by specifying the "Name" and "ID" of the transponder.
3. You assign the transponders to the effective ranges.
4. You set the "limit" for each effective range.
Commissioning
When commissioning the plant, you need to enter the checksum determined during the
verification of the effective ranges in the "Checksum" box in this editor.
4.5.3
Objects for the Mobile Panel 277F IWLAN
Introduction
WinCC flexible ES offers you a variety of objects especially designed for configuring the
Mobile Panel 277F IWLAN.
These objects offer the operator the latest information about the effective range and batteries
during runtime.
Fail-safe operation of the Mobile Panel 277F IWLAN
Function Manual, 08/2008, 6AV6691-1FQ01-2AB0
The "Display name" and "ID" of an effective range cannot be identical.
The "Limit" parameter determines the maximum distance between the HMI device and
the individual transponders of an effective range. The "Limit" parameter applies to all
transponders of the effective range. If the HMI device is located farther from the
transponders than the "Limit", it is outside the effective range.
Configuration
4.5 WinCC flexible
73
Advertisement
Table of Contents
