Deck; Connecting To Amplifier - Symphonic WF802 Owner's Manual

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS SUCH AS MD DECK OR DAT DECK
Use an audio coaxial digital cables (not included) for the audio connections.
Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
Notes
¡ The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
¡
Be sure to turn off the power to all components in the system before connecting another component.
¡
Refer to the Owner's Manuals for the components to be connected to the DVD/VCR.
¡
Set Dolby Digital to off for audio output in the setup mode. Playing a DVD disc using incorrect settings may
generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital to on)
ANT - IN
ANT - OUT
CH3 CH4
To COAXIAL DIGITAL
AUDIO INPUT jack
– 15 –
DVD/VCR
OUT
IN
L
DVD/VCR
AUDIO OUT
AUDO
DIGITAL AUDIO OUT
S-VIDEO
L
R
PCM / BITSTREAM
OUT
COAXIAL
VIDEO R
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
EN
1L25