I Special Features; Copying A Video Tape; Mts (Multi-Channel Television Sound) System - Symphonic WF802 Owner's Manual

Dvd player with video cassette recorder
Hide thumbs Also See for WF802:
Table of Contents

Advertisement

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or
relatives for your enjoyment.
Warning:
Unauthorized recordings of copyrighted video tapes
may be an infringement of copyright laws.
Connect the recording DVD/VCR (this unit), the play-
ing VCR (another source) and your TV using the fol-
lowing diagram.
¡
You can use the AUDIO/VIDEO input jacks on the
front panel of the DVD/VCR instead of using the
jacks on the back.
[Recording VCR]
(this unit)
ANT - IN
ANT - OUT
3CH 4CH
Coaxial cable
(supplied)
[TV set]
(Use for monitoring)
ANT in
1
Insert a pre-recorded tape into the playing
VCR.
2
Insert a tape with a safety tab into the
recording VCR.
3
Press the SPEED button on the recording
VCR to select the desired recording speed
(SP/SLP).
¡
When you use the A/V input jacks on the back of the
DVD/VCR, select "L1" position by pressing [0], [0], [1]
on the remote control or the CHANNEL buttons (o/p).
¡
When you use the A/V input jacks on the front of the
DVD/VCR, select "L2" position by pressing [0], [0], [2]
on the remote control or the CHANNEL buttons (o/p).
Note
"L1" and "L2" are found before the lowest memo-
rized channel. (Example: CH2)
4
Press the REC/OTR button on the recording VCR.
5
Begin playback of the tape in the playing
VCR.
¡
For best results during dubbing, use the
DVD/VCR's front panel controls whenever possi-
ble. The remote control might affect the playing
DVD/VCR's operation.
SPECIAL FEATURES
VCR
DVD/VCR
OUT
IN
L
DVD/VCR
AUDIO OUT
AUDO
DIGITAL AUDIO OUT
S-VIDEO
L
R
PCM / BITSTREAM
OUT
COAXIAL
VIDEO
R
Audio/Video cables
(not supplied)
OUT
LEFT RIGHT
IN
AUDIO
VIDEO
[Playing VCR]
(another source)
¡
Always use video-quality shielded cables with
RCA-type connectors. Standard audio cables are not
recommended.
¡
You can use a video disc player, satellite receiver, or
other audio/video component with A/V outputs in
place of the playing VCR.
TO MONITOR THE RECORDING
1
Turn on the TV and set the TV to channel 3 or 4.
¡
Now set the CH3/CH4 switch on the back of the
DVD /VCR to match the channel selected on the TV.
2
Press the VCR/TV button on the recording
VCR so that the VCR/TV Light comes on.
MTS (Multi-Channel Television
Sound) SYSTEM
When you play a VHS tape, or receive a broadcast on the
DVD/VCR tuner channel you are watching, the current
status will appear when you press
the DISPLAY button on the
remote control. When you record a
MTS broadcast signal, you need to
set it to MTS mode.
1)*
When a program is broadcast in stereo,
STEREO appears. When a program is
broadcast in second audio, SAP appears.
¡
Although a program may be broadcast in both stereo
and sub audio, you must select the Recording mode to
TV STEREO or SAP before you record a broadcast.
2)*
While the VCR is set in HiFi stereo mode,
HiFi appears on the TV screen. While the
VCR is set in monaural (MONO) mode,
HiFi disappears from the TV screen.
¡
If you play non-HiFi tapes while the VCR is set in
HiFi, HiFi will disappear from the TV screen and the
VCR will automatically play in monaural.
MTS RECORDING/MONITOR MODE
Type of
Display on the
TV screen
broadcast
Regular
-None-
(monaural audio)
Stereo
STEREO
broadcast
SAP
Bilingual
broadcast
Stereo &
STEREO
Bilingual
SAP
broadcast
*
– 22 –
STOP
SP
0:00:00
STEREO/SAP
Hi-Fi audio track
Selection
(2-channel)
L-channel
R-channel
-Invalid-
Mono
Mono
- nvalid-
I
L
R
Main audio
Main audio
TV STEREO*
program
program
Sub audio
Sub audio
SAP*
program
program
TV STEREO*
L
R
Sub audio
Sub audio
SAP*
program
program
VCR
12:00AM
CH 32
1)*
STEREO
SAP
2)*
HIFI
Normal audio
track
Mono
L+R
Main audio
program
Sub audio
program
L+R
Sub audio
program
EN
1L25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents