Scanner Emulation Parameter Defaults - Symbol DS 3408 Product Reference Manual

11-4 DS 3408 Product Reference Guide
3. Scan the Scanner Emulation Host bar code from
interface.
4. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
WARNING

Scanner Emulation Parameter Defaults

Table 11-1 lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in the
Scanner Emulation Host Parameters section beginning on page 11-6.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
Scanner Emulation Host on page 11-6
for all user preferences, hosts, symbologies, and
to enable the Scanner Emulation host