Description Of Controls; Avoid The Hazards Of Electrical Shock And Fire - Sylvania C6260VD Owner's Manual

Sylvania video cassette recorder owner's manual c6260vd
Table of Contents

Advertisement

PRECAUTIONS
Install Location
For safety and optimum performance of your VCR:
• Install the VCR in a horizontal and stable position. Do not place
anything directly on top of the VCR. Do not place the VCR directly
on top of the TV.
• Shield it from direct sunlight and keep it away from sources of
intense heat. Avoid dusty or humid places. Avoid places with insuffi-
cient ventilation for proper heat dissipation. Do not block the ventila-
tion holes on the sides of the VCR. Avoid locations subject to strong
vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC wall
outlet. Grasp it by the plug.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved
from a cold place to a warm place, or after heating a cold room or
under conditions of high humidity. Do not use the VCR at least for 2
hours until its inside is dry.
FCC Warning
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful inter-
ference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.

DESCRIPTION OF CONTROLS

Front Panel
POWER CHANNEL
n m
VIDEO
L-AUDIO-R
13
12
11
10
9
1. Cassette Compartment
2. F.FWD button
3. PLAY button
4. REW button
5. STOP/EJECT button
6. REC/OTR button
7. MENU button
Indicator
POWER VCR/TV
14 15 16 17 18
14. POWER indicator
15. VCR/TV indicator
16. TAPE IN indicator
Rear Panel
25
19. AUDIO OUT jacks
20. AUDIO IN jacks
21. ANT. IN jack
22. ANT. OUT jack
1
MENUREC/OTRSTOP/EJECT REW
PLAY
V
PN
s
b
POWER
VCR/TV
TAPE IN
TIMER
REC
8
7
6
5
4
3
18. Indicator
19. Remote Sensor
(
)
10. CHANNEL
11. POWER button
12. AUDIO Input jacks
13. VIDEO Input jack
TAPE IN
TIMER
REC
17. TIMER indicator
18. REC indicator
19
20 21
AUDIO
L
OUT
IN
R
VIDEO
OUT
IN
24 23 22
23. VIDEO IN jack
24. VIDEO OUT jack
25. AC Power Cord
Important Copyright Information
Unauthorized recording or use of broadcast television programming,
video tape, film or other copyrighted material may violate applicable
copyright laws. We assume no responsibility for the unauthorized
duplication, use, or other acts which infringe upon the rights of copy-
right owners.
A Note about Recycling
This product's packaging materials are recyclable and can be reused.
Please dispose of any materials in accordance with your local recy-
cling regulations. Batteries should never be thrown away or incinerat-
ed but disposed of in accordance with your local regulations concern-
ing chemical wastes.
Note to the Cable TV System Installer
This reminder is provided to call the Cable TV system installer's
attention to Article 820-40 of the National Electrical Code, which pro-
vides guidelines for proper grounding – in particular, specifying that
the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Remote Control
EJECT
1
F.FWD
a
1
2
4
7
2
MENU
3
buttons
RECORD
SPEED
4
5
6
7
To insert the batteries
Install two AA batteries
(supplied) matching the
polarity indicated on the
bottom of the remote
control.
VIDEO OUT Jack
Connect a video cable going to
the video in jack of a camcorder,
another VCR, a TV, or an audio-
ANT
IN
visual system (laser disc player,
video disc player, etc.) here.
OUT
AUDIO OUT Jacks
Connect the audio cables going
to the audio in jacks of a cam-
corder, another VCR, a stereo
amplifier, or an audio system
here.
– 2 –
1. EJECT button
2. NUMBER buttons
17
3. MENU button
POWER
VCR /TV
16
4. RECORD button
5. SPEED button
2
3
6. REW button
15
5
6
CHANNEL
7. STOP button
8. PLAY button
SEARCH
8
9
-MODE
14
9. F.FWD button
C.RESET
0
10. DISPLAY button
SLOW
EXIT
13
11. PAUSE/STILL button
12
PAUSE
DISPLAY
/STILL
11
12. SLOW button
10
13. C.RESET/EXIT button
14. SEARCH-MODE button
9
15. CHANNEL
8
16. POWER button
17. VCR/TV button
VIDEO IN Jack
Connect a video cable coming
from the video out jack of a
camcorder, another VCR, or an
audio-visual source (laser disc
player, video disc player, etc.)
here.
AUDIO IN Jacks
Connect the audio cables com-
ing from the audio out jacks of a
camcorder, another VCR, or an
audio source here.
(
)
buttons
EN

Advertisement

Table of Contents
loading

Table of Contents