Channel Set Up Again; Deleting (Or Adding) Channel - Sylvania SSC132 Owner's Manual

1
Select "SETTING CLOCK"
Press the MENU button on the
remote control. Press the PLAY/K
or STOP/L button to point to "SET-
TING CLOCK".
Then, press the F.FWD/B button.
2
Select "MANUAL CLOCK
SET"
Press the PLAY/K or STOP/L but-
ton to point to "MANUAL CLOCK
SET".
Then, press the F.FWD/B button.
3
Select the month
Press the PLAY/K or STOP/L but-
ton until your desired month
appears. (Example: May
Then, press the F.FWD/B button.
4
Select the day
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 7th → 07)
Then, press the F.FWD/B button.
5
Select the year
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2002)
Then, press the F.FWD/B button.
6
Select the hour
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Select the minute
Press the PLAY/K or STOP/L but-
ton until the desired minute appears.
(Example: 40)
8
Start the clock
Press the MENU button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the MENU button on the remote control.
Use this feature to synchronize the clock with the
correct time.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH [AUTO]
B MANUAL CLOCK SET
D.S.T. [OFF]
– MANUAL CLOCK SET –
MONTH DAY
0 5 / – – – – – – – – –
→ 05)
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY
0 5 / 0 7 – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY
0 5 / 0 7 TUE
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY
0 5 / 0 7 TUE
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY
0 5 / 0 7 TUE
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and press
YEAR
the F.FWD/B or REW/s button to turn [OFF] this
function. Then you can manually adjust the clock.

CHANNEL SET UP AGAIN

Make sure ...
YEAR
•
Press the POWER button to turn on the TV/VCR.
1
Select "CHANNEL SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
YEAR
ton to point to "CHANNEL SET
2 0 0 2
UP".
Then, press the F.FWD/B button.
2
Begin auto preset
Press the PLAY/K or STOP/L but-
YEAR
ton to point to "AUTO PRESET".
2 0 0 2
Then, press the F.FWD/B button.
The tuner scans and memorizes all
the active channels in your area.
3
After scanning
YEAR
The tuner stops on the lowest memorized channel.
2 0 0 2
DELETING (OR ADDING)
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
- 12 -
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– CHANNEL SET UP –
ADD / DELETE CH (TV)
B AUTO PRESET
CHANNEL
– M E N U –
EN
9I03