Table of Contents
Advertisement
46.
ANT. in Jack
Connect to an antenna, cable system or satellite
system.
47.
Power cord
Connect to a standard AC outlet (120V/60Hz).
Remove the power cord from the hook to
NOTE:
avoid breaking a wire before you connect
to a standard AC outlet.
Satellite Box or
Cable Box (Not supplied)
O UT
75-ohm
Coaxial
From Cable
Cable
System
(Not
supplied)
75-ohm Coaxial
Cable
(Not supplied)
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/VCR/DVD without a converter
box.
By using this connection you can:
1) Use the TV/VCR/DVD remote to select channels.
2) Program one or more unscrambled channels for
Automatic Timer Recording.
NOTE: This TV/VCR/DVD will ONLY record and
view the same channel.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
From Cable System or
IN
Satellite Dish
AUDIO OUT
ANT.
COAXIAL
ANT.
or
48.
COAXIAL digital audio out Jack
Connect to the digital input of an external Audio
receiver.
Only DVD, CD and MP3 audio will be
NOTE:
output from this jack.
or
VHF/UHF
Combiner
(Not supplied)
Flat twin-lead cable
or
CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the illustration.
By using this connection you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/VCR/DVD Remote Control. Unattended timer
recording is limited to one channel at a time.
- 11 -
VHF/UHF Antenna
(Not supplied)
VHF Antenna
(Not supplied)
UHF Antenna
(Not supplied)
[Fig. 4]
Antenna/Cable Connections
Continued on the Next Page.
EN
1C29
Advertisement
Table of Contents
