Table of Contents
Advertisement
3
To stop playback
Press the STOP button when play-
back is completed.
AUTO REPEAT PLAYBACK
The TV/VCR has an auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
Repeat playback from the beginning
ALL REPEAT:
to the end of the tape.
: Repeat playback from the begin-
BLANK REPEAT
ning to a blank part of more than 10 seconds.
1
Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
2
Select "ALL" or "BLANK"
Press the PLAY/K or STOP/L button to point to
"REPEAT PLAY".
Press the F.FWD/B or REW/s
button repeatedly until your desired
selection [ALL] or [BLANK]
appears.
3
Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
STOP
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REW button during playback (in the
SP / LP / SLP modes).
2)Press it again and the TV/VCR will now search in
super high speed (in the LP / SLP modes only).
NOTE: Tapes recorded in the SP or LP mode will
display a noise bar on the TV screen and the pic-
ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
ZERO RETURN
This function allows you to search easily a beginning
– M E N U –
point that you want to review by rewinding or fast
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
forwarding.
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
NOTE:
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
Zero Return WILL NOT work on a blank tape or a
TIME SEARCH
INDEX SEARCH
blank portion of a tape.
1
Rewind or fast forward the tape to the beginning
– USER'S SET UP –
point from which you want to review.
RENTAL
[OFF]
B REPEAT PLAY
[ALL]
AUTO RETURN
[OFF]
2
Press the COUNTER RESET button repeatedly.
3
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to
"ZERO RETURN".
Then, press the F.FWD/B button.
The counter will appear on the TV
screen.
The tape will automatically stop
when the counter returns to 0:00:00.
TIME SEARCH
The Time Search function makes it possible to
quickly advance the tape to your desired position
simply by entering the exact amount of playback
time you want to skip.
- 18 -
SEARCH
Stop a tape at your desired point
Reset the counter to 0:00:00
Begin recording or playback
To activate "ZERO RETURN" mode
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
INDEX SEARCH
EN
8H30
Advertisement
Table of Contents
