Clock Set Up (Auto / Manual) - Sylvania 6719DD Owner's Manual

CLOCK SET UP
(AUTO / MANUAL)
The TV/DVD/VCR clock must be set correctly before
VCR timer recording is possible. It is suggested that the
clock be set manually when first setting up the
TV/DVD/VCR. Then, setup auto clock correction which
will periodically correct the setting if necessary.
NOTE: If you cannot receive a station with time sig-
nals, auto clock setting cannot be performed. Use
manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•
TV/DVD/VCR power is turned on.
In the example below, the clock is to be set to:
DATE May 6th, 2003
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "SETTING CLOCK".
Then, press the ENTER button.
2
Select "MANUAL CLOCK
SET"
Press the Arrow button K or L to
point to "MANUAL CLOCK SET".
Then, press the ENTER button.
3
Select the month
Press the Arrow button K or L until
your desired month appears.
(Example: May → 05)
Then, press the Arrow button B.
4
Select the day
Press the Arrow button K or L until
your desired day appears.
(Example: 6th → 06)
Then, press the Arrow button B.
5
Select the year
Press the Arrow button K or L until
your desired year appears.
(Example: 2003)
Then, press the Arrow button B.
6
Press the Arrow button K or L until
your desired hour appears.
TV/VCR
(Example: 5, PM)
Then, press the Arrow button B.
7
Press the Arrow button K or L until
the desired minute appears.
(Example: 40)
8
Press the SETUP button on the
remote control.
Although seconds are not displayed,
they begin counting from 00 when
you press the SETUP button on the
remote control. Use this feature to synchronize the
clock with the correct time.
NOTE:
- TV/VCR SETUP -
When unplugging the AC cord or if there is a power
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SET UP
failure for more than 3 seconds, you may have to
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH] reset the clock.
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
– SETTING CLOCK –
AUTO CLOCK [ON]
2)Select where you want to change using the Arrow
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [02]
button B or s.
B MANUAL CLOCK SET
D.S.T. [OFF]
3)Enter correct numbers using the Arrow button K or
L.
4)Press the SETUP button on the remote control to
start the clock.
– MANUAL CLOCK SET –
PLEASE NOTE:
MONTH DAY YEAR
0 5 / – – – – – – – – –
If there is no local PBS station in your area or on
HOUR MINUTE
your cable system, select "AUTO CLOCK" and
– – : – – – –
press the ENTER button to turn [OFF] this function.
Then you can manually adjust the clock.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
– – : – – – –
- 17 -
Select the hour
Select the minute
Start the clock
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
EN
1C29