Table of Contents
Advertisement
4 - Battery charge indicator.
- If the battery charge indicator flashes when moving,
you are advised to have the battery charge system
checked by an approved dealer.
5 - Outside temperature gauge.
-The temperature shown is that
read on the front of the vehicle.
v
-The "risk of black ice" symbol
comes on as soon as the
temperature falls below3°C (v).
6 - Maintenance indicator.
- The maintenance indicator appears on the display
each time a service recommended by the
manufacturer is due. The frequency is calculated by
the on-board computer.
• Maintenance frequency: 10000 km.
7 - Fuel gauge/Fuel reserve gauge.
-When the fuel tank is full all the
segments of the fuel gauge are
lit.
-The fuel reserve gauge
r
corresponds to the two last
segments (r) which show two
p
reserve levels.
•1st level : the two segments
flash.
• 2nd level: the last segment flashes.
- When the tank is empty, all the segments on the fuel
gauge are off and the "pump" symbol flashes (p).
- If all the segments flash, the diagnostic function has
detected an anomaly on the fuel gauge system. The
system must be checked by an authorised dealer.
ON-BOARD COMPUTER
A
1. Milometer/Tripmeter (TRIP).
2. Autonomy indicator.
3. Instantaneous consumption indicator/Average
consumption indicator.
A. Display control knob.
B. Select key "MODE".
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
1
2
3
B
-Each time the ignition is
switched on, the on-board
computer displays the
remaining kilometers until
the next vehicle
6
service (m).
-When the kilometers
reach zero, the
maintenance symbol is
m
displayed on the multi-
function display (6).
You are advised to go to an authorised dealer to
have the vehicle serviced and the message on the
maintenance indicator erased.
Milometer.
- The tripmeter displays and stores the number of kilometres
travelled by the vehicle. The machine total kilometres
remains in the memory when the battery is disconnected.
Tripmeter.
(TRIP)
- The tripmeter displays and stores the number of kilometers
travelled during a given period.
- The vehicle's trip meter remains in the memory even when
the battery is disconnected.
Changing from the total distance display to the daily
distance display.
- With the ignition on, you can switch between the trip meter
and the total kilometers meter by a quick press on the
settings button (A) or by pressing the selection button for
longer than 3 seconds (MODE (B)).
Resetting the tripmeter.
- Resetting the tripmeter is done from the TRIP position.
- With the ignition switched on, the trip meter can only be
reset by pressing the settings button (A) for longer than 3
seconds.
PEUGEOT METROPOLIS
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
9/24
Hide quick links:
Advertisement
Table of Contents
