Timer Program Extension - Sylvania SSC719C Owner's Manual

5
Set beginning hour
Press the Arrow K or L button until
the desired hour appears.
(Example: " 7, PM" for 7:30PM)
Then, press the Arrow B button.
6
Set beginning minute
Press the Arrow K or L button until
the desired minute appears.
(Example: "30" for 7:30PM)
Then, press the Arrow B button.
7
Set end hour
Press the Arrow K or L button until
the desired hour appears.
(Example: "8, PM" for 8:50PM)
Then, press the Arrow B button.
8
Set end minute
Press the Arrow K or L button
until the desired minute appears.
(Example: "50" for 8:50PM)
Then, press the Arrow B button.
9
Set the tape speed
Press the Arrow K or L button
until the desired tape speed
appears. (Example: SP)
10
Finish setting the program
Press the Arrow B or s button. The program is now
completed.
•
To set another program, repeat steps [2] to [10].
•
Press the SETUP button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
•
You must turn off the TV/DVD/VHS to activate
automatic timer recording.
If power is not turned off and you continue watch-
ing TV, "TIMER REC STANDBY" starts flashing
on the TV screen 2 minutes before the programmed
start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –
CH DATE BEGIN END
To shift the time schedule of an automatic timer
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
recording.
P
B 61 7/06 FRI 7:12 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Press the POWER button.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat step [1] on page 32.
3)Press the RECORD button and select the desired
– TIMER PROGRAMMING –
program using the Arrow K or L button.
CH DATE BEGIN END
4)Press the RECORD button again.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P Each additional push will shift forward the
B 61 7/06 FRI 7:30 -:- - - -
M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
begin/end time for recording by 10 minutes. When
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the PAUSE but-
– TIMER PROGRAMMING –
ton on the remote control. The recording time
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
returns to the original time.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:30 - -
M M
NOTE: When you shift forward the time schedule
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
during recording, the recording speed will automati-
- - -/- - - - - -:- - -:- - - -
cally be set to the SLP mode.
5)Press the Arrow B or s button to exit the setting
– TIMER PROGRAMMING –
menu. Then press the SETUP button on the remote
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - - control to return to original mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/06 FRI 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TO CORRECT A PROGRAM
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
•
While setting a program; press the Arrow s but-
ton to go back one step and enter the correct num-
bers using the Arrow K or L button.
– TIMER PROGRAMMING –
CH DATE BEGIN END
•
After setting a program;
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - - 1)Press the POWER button.
P P
B 61 7/06 FRI 7:30 8:50 SP
M M
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
2)Repeat steps [1] - [2] on page 32.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
3)Press the Arrow B button (or press the Arrow s
4)Press the POWER button to set automatic timer
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 32 and select a
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to
•
While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the
- 33 -
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the Arrow K or L button.
recording.
program you want to cancel.
return to TV mode.
TV/DVD/VHS.
EN
1C29