Samsung 6300 Series E-Manual page 152

The Problem
Flickering and Dimming
Component
Connections/Screen
Colour
Screen Brightness
Auto Motion Plus/Blur
Unwanted Powering
Off
Problems Powering On
Unable to find a
Channel
If your Samsung Television is flickering or dimming sporadically, you may need
to disable some of the energy efficiency features. Disable
Eco Solution Energy
Sensor).
"
Availability depends on the specific model and area.
If the colour on your Samsung television screen is not correct or the black and
white colours are off, run
If the test results indicate that the problem is not caused by the TV, do the
following:
● Confirm that the TV's video input connectors are connected to the correct
external device video output connectors.
● Check the other connections as well. If the TV is connected to an external
device via a component cable, confirm that the Pb, Pr, and Y jacks are plugged
into their proper connectors.
If the colours on your Samsung TV are correct but just a little too dark or bright,
try adjusting the following settings first.
● Go to the
Picture menu and adjust the Contrast, Brightness, Sharpness, Colour,
and Tint (G/R) settings.
If you notice ghosting or blurring on the screen, use the
(Picture Picture Options
"
Availability depends on the specific model and area.
If your Samsung TV appears to turn off by itself, try disabling some of the TV's
energy efficiency features. See if
has been enabled. The
period of time. If the Sleep Timer has not been enabled, see if
Off (System Eco Solution
Eco Solution Auto Power
When the TV is turned on, the remote control receiver flashes 5 times before the
screen turns on.
If you are having problems powering on your Samsung television, there are a
number of things to check before calling the service department. Confirm that the
TV's power cord is connected correctly at both ends and that the remote control
is operating normally. Make sure that the antenna cable or cable TV cable is firmly
connected. If you have a cable box confirm that it is plugged in and turned on.
Launch Setup (System
If your TV is not connected to a cable box, run
Tuning (Broadcasting
Try this!
Saving) or Eco Sensor (System
Picture Test (Support
Auto Motion Plus) to resolve the issue.
Sleep Timer (System
Sleep Timer automatically turns the TV off after a specified
No Signal Power
Off) has been enabled and disable them.
Setup) or Auto Tuning (Broadcasting
Auto Tuning).
Energy Saving (System
Eco Solution
Self Diagnosis Picture
Auto Motion Plus
Time Sleep
No Signal Power
Off) or Auto Power Off (System
Auto
Setup (System Setup) or
Eco
Test).
option
Timer)
Tuning).
Auto