Flipping The Screen - Honeywell RAE Systems NeutronRAE II User Manual

Turning NeutronRAE II Off
Press the MODE button and hold for 5 seconds. The detector
counts down 5 seconds and then turns itself off. Do not
release the MODE button until the unit counts down to zero
and the display reads "Save config..." and "Stop unit..."

Flipping the Screen

The NeutronRAE II is easy to read, whether held in the hand
or clipped to a belt. To flip the screen, press the SET button
and hold it down for 3 seconds. When the image inverts,
release the button.
To flip the display again, press and hold SET for 3 seconds.
12
NeutronRAE II