C Tv Operation; Watching A Tv Program; Degaussing; Picture Control - Sylvania 6719DDS Owner's Manual

WATCHING A TV PROGRAM

1
Turn on the TV/DVD/VCR
Press the POWER button to turn on the
TV/DVD/VCR.
2
Select the channel number
Press the CHANNEL button K or L to select your
desired channel number or press the number on the
remote control.
Note for using the Number button on the remote
control:
¡
When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
"+100" then press "2" and "5").
¡ You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
Remember: If the TV/DVD/VCR is connected to a
cable box or satellite box, the TV/DVD/VCR must
be on CH3 or CH4, then the channel to be viewed
must be selected on the cable box or satellite box.
3
Adjust sound
Press the VOLUME button X X or Y Y
to adjust the volume.
NOTES:
•
If you press the CHANNEL button o or p in the
DVD mode, you can change the TV channels.
Even if you turn off the TV/DVD/VCR in the
DVD mode, when you turn it on again, it will go
into the TV/VCR mode.

DEGAUSSING

Magnetism from nearby appliances and speakers might
affect the color of the TV picture.
If this happens, move this TV/VCR/DVD away from
the appliance. If the color is still not correct, unplug the
power cord, then plug it in again 30 minutes or so later.
TV OPERATION
TV/VCR
The TV/DVD/VCR's picture controls – BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS –
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
•
Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
TV/DVD/VCR power must be turned on.
1
Select "PICTURE CONTROL"
Press the PICTURE button on the remote control.
2
Select item you want to adjust
Press the Arrow button K or L until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
VOLUME 20
C C C C C
C C C C C C C
3
Adjust the picture control
Press the Arrow button B or s to adjust to your
desired level.
BRIGHT
CONTRAST
COLOR
TV/VCR
TINT
SHARPNESS
•
If there is a power failure of any kind, the
TV/VCR/DVD will retain its memory for this fea-
ture.
- 19 -

PICTURE CONTROL

Arrow button s Arrow button B
to decrease
brightness
to decrease
contrast
to pale
to purple
to soft
TV/VCR
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
EN
1C29