Mpaa Rating Set Up; Change Access Code - Sylvania 6519VD Owner's Manual

MPAA RATING SET UP

Make sure ...
•
TV/DVD power must be turned on.
1
Select "V-CHIP SET UP"
Press SETUP on the remote control.
Press K or L to point to "V-CHIP
SET UP".
Then, press ENTER.
2
Enter 4-digit access code
Press Number on the remote con-
trol. The default code is 0000.
3
Select "MPAA RATING"
Press K or L to point to "MPAA
RATING".
Then, press ENTER.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
4
Select your desired item
Press K or L to point to your
desired item.
Then, press ENTER to select
[BLOCK] or [VIEW].
•
When you select the rating cate-
gory and turn it [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
•
When you turn "G" to [VIEW], the all ratings will
turn to [VIEW] automatically.
5
Exit the V-Chip setting mode
Press SETUP on the remote control to return to origi-
nal mode.

CHANGE ACCESS CODE

To change access code, follow the steps.
1
Press SETUP on the remote con-
- TV SETUP -
trol.
CHANNEL SET UP
Press K or L to point to "V-CHIP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
SET UP".
Then, press ENTER.
2
ACCESS CODE
Press Number on the remote con-
_ _ _ _
trol. The default code is 0000.
3
– V-CHIP SET UP –
Press K or L to point to
TV RATING
B MPAA RATING
CHANGE CODE
"CHANGE CODE".
Then, press ENTER.
4
Press Number to enter your desired
access code in the NEW CODE
space. Then, enter the same code in
the CONFIRM CODE space. V-
CHIP SET UP screen appear on the
screen.
•
If you enter wrong code, repeat step 4, making
sure you enter the same new code exactly in the
confirm code space.
5
Press SETUP on the remote control to return to orig-
inal mode.
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
NOTE:
X [BLOCK]
•
If you unplug the power code or power failure
occurs, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
– 18 –
Select "V-CHIP SET UP"
Enter 4-digit access code
Select "CHANGE CODE"
Enter 4-digit access code
Exit the V-Chip setting mode
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
EN
0C28