Sleep Timer; Closed Caption System - Sylvania 6513DF Owner's Manual

SLEEP TIMER

The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
1
Call up the Sleep Timer Setting
Hit [SLEEP] so that "SLEEP 0 MINUTE" appears.
2
Set sleep time
Hit [SLEEP] repeatedly until your
desired sleep time appears.
Each additional press will increase
the time by 30 minutes up to 120
minutes.
After 5 seconds, the Sleep Timer setting will disap-
pear automatically.
TO CANCEL THE SLEEP TIMER
Hit [SLEEP] to call up the Sleep Timer Setting. Hit
[SLEEP] repeatedly until "SLEEP 0 MINUTE"
appears.

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
You can watch dramas, movies and
CAPTION mode:
news while captioning the dialogues and the contents
of news.
You can watch half screen text informa-
TEXT mode:
tion if you want.
You may get these captions or text information
1-2:
by selecting either "1" or "2". Caption "2" is usually
used for a second language if available.
NOTES:
•
Not all programs are broadcast with closed cap-
tions. Your unit is designed to provide error free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality signals
are likely to result in caption errors or no captions
at all. Common signal conditions which may cause
caption errors are listed below:
•
Automobile ignition noise
•
Electric motor brush noise
•
Weak snowy reception on TV screen
•
Multiplex signal reception displaying picture
ghosts or airplane flutter
•
If the unit displays a black box
on the TV screen, this means that
the unit is set to the TEXT mode.
TV
To clear screen, select [CAP-
TION1], [CAPTION2] or [OFF].
Make sure ...
•
The unit must be turned on.
1
Select "CAPTION"
Hit [SETUP].
Press [K / L] to point to "CAP-
TION".
SLEEP 120 MINUTE
2
Select your desired caption mode
Hit [ENTER] repeatedly until your
desired caption menu appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3
Exit the caption setting mode
Hit [SETUP] to exit the menu.
NOTE:
•
Even if there is a power failure of any kind, the
TV
unit will retain its memory for this feature.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps 1 to 2 and select [OFF] using
[ENTER]. Then hit [SETUP] to return to TV mode.
- 14 -
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
EN