Connecting To A Stereo System; Connecting To An Amplifier Equipped With Digital Input Jacks, Md Deck Or Dat Deck (For Dvd Only) - Sylvania 6509DD Owner's Manual

Stereo system
To ANALOG AUDIO INPUT jacks
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD.
•
The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY
DIGITAL to OFF.)

CONNECTING TO A STEREO SYSTEM

To COAXIAL DIGITAL
AUDIO INPUT jack
To Right (red) and Left (white)
AUDIO OUT jacks
– 12 – – 12 –
DC 13.2V
L
AUDIO OUT
L
R
AUDIO OUT
R
COAXIAL
COAXIAL
[Fig. 7]
L
AUDIO OUT
R
AUDIO OUT
COAXIAL
COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 8]
ANT.
DC 13.2V
ANT.
L
R
EN
0C28