Removing & Installing Body Components; Battery - Honda CB500FA 2018 Owner's Manual

20180925141151_32MKPA000_eng_BOOK Page 82 Tuesday, September 25 2018 14:19:26 JST
Removing & Installing Body Components

Battery

Rubber strap
Negative
terminal
Battery
Positive terminal
#
Removal
Make sure the ignition switch is in the
position.
Remove the front seat.
1.
2
Unhook the rubber strap from rear side.
2.
Disconnect the negative - terminal from the
3.
battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
# Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead." P. 121
2
(Off)
P. 81
P. 33
2
P. 68
2
79