Table of Contents
Advertisement
BASIC FUNCTION
Switching on for OSD language setup
1 Slide the POWER switch to ON to switch on the player.
2 Press SETUP for the setup menu.
3 Select General Setup Page and press ENTER .
4 Scroll and select OSD Language and
press
to select from OSD language
options.
5 Select your preferred language and press ENTER.
Loading discs and switching on
1 Press OPEN to open the disc door.
2 Insert your chosen disc, label side up (also when a double sided DVD disc is
inserted). Make sure it is sitting properly in the correct recess.
3 Gently push to close the door.
4 Slide the POWER switch to ON to switch on the player.
TIP
A normal mechanical noise is heard during playback.
Playing a DVD disc
After switching on, inserting the disc and closing the door, playback starts auto-
matically. The screen shows the type of disc loaded. The disc may invite you to
select an item from a menu. Use the
and press ENTER.
Note: Since it is usual for DVD movies to be released at different times in
different regions of the world, all players have region codes and discs
can have an optional region code. If you load a disc of a different region
code to your player, you will see the region code notice on the screen.
The disc will not play, and should be unloaded.
Playing an audio or video CD disc
After switching on, inserting the disc and closing the door, playback starts
automatically. The screen shows the type of disc loaded as well as
information about the disc s contents.
While playing VCD with MTV/Karaoke, press number keys(0-9) to select the
track and press
or ENTER to play the track. Press MENU to go back to
menu of the selection.
, ,
,
keys to highlight your selection,
12
BASIC FUNCTION
Playing an MP3 CD
The following playback features are available for MP3 CDs.
Please refer to the corresponding sections for more information.
Volume control, skipping tracks, searching, repeat etc .
Use the
, keys to highlight your selected music folder.
Press ENTER to play.
Playing a JPEG discs
Use the , ,
,
keys to highlight your selected picture folder.
Press ENTER.
The player will then automatically enter the slide show mode.
During playback, you can:
Use the
, ,
,
to rotate the picture.
Use the
to flip up/down.
Use the
to flip left/right.
Press MENU or
to go to group preview.
Use the
, ,
,
to highlight the preview picture and access the
on-screen functions.
Press ZOOM repeatedly to display the picture with different scales.
Use the
,
,
,
to view the zoomed picture (for picture zoomed in
only).
Note: Unless stated otherwise, all operations described are based on remote
control operation.
Playing files stored in an SD/MMC Card
After connecting an SD/MMC card to this player, you can play audio/video files
stored in the card by selecting the desired file with
13
,
and ENTER.
Advertisement
Table of Contents
