Table of Contents
Advertisement
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 19.
4
Select the desired item.
ENTER
DISPLAY menu
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO1
ENTER
FORMAT
RGB
RGB RANGE
NORMAL
5
PROGRESSIVE:
QUICK
(Default: OFF)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
6
To complete the
PROGRESSIVE setting
ENTER
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
STILL MODE: (Default: AUTO)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
PROGRESSIVE MODE: (Default: AUTO1)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
FORMAT: (Default: RGB)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
RGB RANGE: (Default: NORMAL)
See note on the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
4:3 LETTERBOX
SETUP
AUTO
ON
AUTO 1
RGB
NORMAL
If there is no picture or you
do not press any buttons
for 15 seconds, Progressive
Scan will switch to "OFF".
Confirm again to use progressive scan.
If Picture is good, Select "YES".
NO
NO
YES
YES
SELECT: K / L
SET:ENTER
Select the
TV ASPECT
desired
4:3 LETTER BOX
setting.
4:3 PAN & SCAN
16:9 WIDE
16:9 SQUEEZE
ENTER
Select the
STILL MODE
desired
AUTO
setting.
FIELD
FRAME
ENTER
Select the
desired
PROGRESSIVE MODE
setting.
AUTO1
AUTO2
VIDEO
ENTER
4:3 LETTERBOX
AUTO
OFF
AUTO1
YCbCr
NORMAL
4:3 LETTERBOX
AUTO
OFF
AUTO1
RGB
ENHANCED
If "PROGRESSIVE" is "ON",
this message appears:
Select "YES".
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting "YES",
wait about 15 seconds for auto recovery.
A cti va te Pr ogre ssi ve ?
NO
YES
SELECT: K / L
SET:ENTER
Select "YES".
ENTER
ENTER
– 20 –
6
To exit the menu
SETUP
ENTER
Note:
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear
on the top and bottom of the
screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a
ENTER
wide-screen TV is connected to
this unit.
• Select "16:9 SQUEEZE" when
the TV screen is too large
horizontally at "16:9 WIDE"
setting and when it is possible
to adjust the screen size using
the TV's controls.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it
ENTER
automatically selects the best
resolution setting ("FRAME"
or "FIELD") based on the data
characteristics of the pictures.
(default)
• If you select "FIELD", the
picture in the still mode will be
stabilized.
• If you select "FRAME", the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a "frame",
which consists of two separate
images called as "field".
• Some pictures may be blurred
at the "AUTO" setting in the
still mode due to their data
characteristics.
PROGRESSIVE MODE:
• You can select a mode below
for the progressive scan
output.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on
the material of 30-
frame film.
• VIDEO: mode for video
material.
FORMAT:
• Select an HDMI output mode
between "YCbCr" and "RGB".
• When the connected device
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only
when you use the HDMI
connection.
RGB RANGE:
ENTER
• Select a HDMI picture mode
between "NORMAL" and
"ENHANCED".
• Select "ENHANCED" if the
black- white contrast is not
clear.
• This setting is effective only for
HDMI RGB output.
PROGRESSIVE:
• You can set "PROGRESSIVE"
to "OFF" either in "DISPLAY"
menu or by pressing and
holding [PLAY B] on the front
of the unit for more than 5
seconds.
• When "PROGRESSIVE" is "ON",
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at
all.
EN
Advertisement
Table of Contents
