Salton CF-2029 Instruction Booklet page 6

5. Align the hole on top of the door with the top hinge
bracket. Be sure to keep the door flush and level
with the cabinet.
6. Put the bottom hinge bracket on the opposite side
of the bottom of the door and tighten the screws,
but do not over-tighten.
7. Open and close the door several times and make
sure that the door closes easily but forms a tight seal. Adjust the bottom
hinge bracket if the door rubs against the doorframe. Once the door is
aligned, tighten the screws on the bottom hinge bracket.
HOW TO USE
1. Clean the interior surface with lukewarm water and a soft cloth.
2. Plug the unit into a suitable wall outlet (115 volts / 15 amps).
3. Your refrigerator has one control dial for regulating the temperature.
The unit will automatically maintain the temperature level you select.
4. The range of the temperature control knob is from position 1 (warmest)
to position 6 (coldest). Initially set the dial to level 4, as this is most
suitable for general operation. Be sure to wait for 2-3 hours before
placing food within the refrigerator. After 24 hours of use, adjust
the temperature level to your desired setting.
5. Turning the temperature control to the OFF position stops the cooling
cycle but does not shut off the power to the refrigerator.
6. If the unit is unplugged, power is turned off, or you experience an electrical
outage, wait 3-5 minutes before restarting the unit. If you attempt
to restart before this time delay, the refrigerator will not turn on.
7. If you choose to change the thermostat setting, adjust the temperature
control knob by one numerical increment at a time. Allow several hours
for the temperature to stabilize between adjustments.
8. The refrigerator has shelves that can be adjusted to different levels that
will best suit your food storage needs.
Ill. 2
6