Preparation For Use; Turn On The Unit For The First Time; To Add Or Delete Channels; Clock Setup - Sylvania DVC865G Owner's Manual

Preparation for Use

Turn On the Unit for the First Time

Operation described in this manual are
VCR VCR
mainly based on the remote control.
1
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see "RF Output Channel" section on page 6.
2 Select your language in the first time you turn on this unit.
Then press [B] to go to next step.
POWER
Press [B] to start Auto Set Up.
3
Do you connect the cable from the cable box or the satellite box to the unit's
ANT-IN jack?
Yes
Press [MENU] to exit.
• Refer to "Hint for Cable Box or Satellite Box" section on page 6.
No
Please wait for a few minutes.
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G// / K , H// L ] (or [CHANNEL K/ / / L ]).
• If "AUTO SET UP" appears on the TV screen again, check the cable
connections. Then, press [B] once again.
Hint
• Repeat these steps only if either there was a power failure or this unit has been
unplugged for more than 30 seconds.
To Select a Channel
You can select a channel by using the Number buttons or
[ ].
SKIP/CH. G/K, H/L
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press [1], [1], [7])
• You must precede single-digit channel numbers with a zero.
(for example: 02, 03, 04 and so on)

To Add or Delete Channels

1 Press [MENU] to select "CHANNEL SET UP".
Then press [B] to go to next step.
MENU
• If the clock is not set, the "CLOCK SET" screen appears when you press
[MENU]. In this case, press [MENU] again.
2 Select "MANUAL SET UP".
Then press [B] to go to next step.
or
3 Select the channel to be added or deleted.
or
4 Select "ADD" or "DELETE".
To exit the menu
5
E8A00UD_E8C00UD.indd 8 E8A00UD_E8C00UD.indd 8
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
or
AUTO SET UP
YES
After scanning...
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
or
AUDIO OUT
TV STEREO
SAP
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MANUAL SET UP
CHANNEL 30
ADD
or
or
MANUAL SET UP
CHANNEL 30
DELETE
or
CLEAR/
C. RESET
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select "CHANNEL SET UP" by using [K/ / L], then press [B].
3) Select "AUTO SET UP" by using [K/ / L], then press [B]. After
scanning, the tuner stops on the lowest memorized channel.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select "LANGUAGE SELECT" by using [K/L], then
press [B].
[ON]
3) Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by
using [K/L] then press [CLEAR/C.RESET].
Hint
CH 01
• If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select
ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/ / K, H/L] button works
on the channel number memorized in this unit, [K/L] works on all.

Clock Setup

NO
VCR VCR
1 Press [MENU] and select "CLOCK SET".
Then press [B] to go to next step.
MENU
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
Select the current month.
2
Then press [B] to go to next step.
Select the current day.
3
Then press [B] to go to next step.
4 Select the current year.
Then press [B] to go to next step.
5 Select the current hour.
Then press [B] to go to next step.
[OFF]
[ON]
6 Select the current minute.
Then press [B] to go to next step.
7 Select "AM" or "PM".
(CATV)
8 To exit the CLOCK SET screen
(CATV)
Hint
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this unit has
been unplugged for more than 30 seconds.
– 8 –
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
or
AUDIO OUT
TV STEREO
SAP
CLOCK SET
MONTH DAY
1 0 / – –
HOUR MINUTE
– – : – –
or
CLOCK SET
MONTH DAY
1 0 / 0 2
HOUR MINUTE
– – : – –
or
CLOCK SET
MONTH DAY
1 0 / 0 2
HOUR MINUTE
– – : – –
or
CLOCK SET
MONTH DAY
1 0 / 0 2 MON 2 0 0 6
HOUR MINUTE
0 5 : – –
or
CLOCK SET
MONTH DAY
1 0 / 0 2 MON 2 0 0 6
HOUR MINUTE
0 5 : 4 0
or
CLOCK SET
MONTH DAY
1 0 / 0 2 MON 2 0 0 6
or
HOUR MINUTE
0 5 : 4 0
- M E N U -
[OFF]
[ON]
YEAR
– – – –
AM/PM
– –
YEAR
– – – –
AM/PM
– –
YEAR
2 0 0 6
AM/PM
– –
YEAR
AM/PM
– –
YEAR
AM/PM
– –
YEAR
AM/PM
P M AM
B PM
EN
2006/08/18 13:11:04 2006/08/18 13:11:04