Table of Contents
Advertisement
Chapter 2: Server Installation
Figure 2-1: Identifying the Outer Rail and Inner Rails
(Left Rail Assembly Shown)
Locking Tab
Inner Rail
Outer Rail
This Side Faces
Outward
Adjusting Screw
Releasing the Inner Rail
Releasing Inner Rail from the Outer Rails (Figure 6-2)
1. Identify the left and right outer rail assemblies as shown in Figure 6-1.
2. Loosen the adjusting screw slightly.
3. Pull the inner rail out of the outer rail until it is fully extended as illustrated
below.
4. Repeat steps 1-3 for the remaining outer rail.
Figure 2-2: Extending the Inner Rail
1
2
1
3
2-5
Advertisement
Table of Contents
