Important Safety Instructions; For Best Performance - Panasonic VL-FKD2 Getting Started

Dect repeater
Hide thumbs Also See for VL-FKD2:
Table of Contents

Advertisement

the area instruct you not to do so.
Hospitals or health care facilities may
be using equipment that could be
sensitive to external RF (radio
frequency) energy.
R Do not install or use this product near
automatically controlled devices such
as automatic doors and fire alarms.
Radio waves emitted from this
product may cause such devices to
malfunction, resulting in an accident.
R Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW
(max.).)
CAUTION
Preventing fire and electric shock
R Do not use the product in areas that
are exposed to rain, moisture, steam,
or oily smoke, or areas that have
excessive dust.
Preventing accidents, injuries, and
property damage
R Do not use the product in unstable
areas or areas prone to strong
vibrations.
When mounting the product to a wall,
install the product securely adhering
to the instructions in this manual to
prevent it from falling off the wall.
Avoid installing onto low-strength
walls, such as gypsum board, ALC
(autoclaved lightweight concrete),
concrete block, or veneer (less than
18 mm thick) walls. These may cause
the product to fall, resulting in
damage to the product or injury.

Important safety instructions

When using your product, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, and injury to persons, including
the following:
1. Do not use this product near water for
example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement or near
a swimming pool.
2. Use only the AC adaptor indicated in this
manual.
SAVE THESE INSTRUCTIONS

For best performance

Location/avoiding noise
The repeater and other compatible Panasonic
units use radio waves to communicate with each
other. (The product operates in the frequency
range of 1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Install the repeater within the main monitor
range of the Video Intercom System in an
indoor environment. We recommend installing
the repeater in a raised position (such as on a
wall).
R For maximum coverage (approx. 100 m) and
noise-free communications, install your repeater:
– at a convenient, high, and central location
with no obstructions between the sub monitor
(or camera) and repeater in an indoor
environment.
– away from electronic appliances such as TVs,
radios, personal computers, wireless devices,
or digital cordless phones.
– facing away from radio frequency
transmitters, such as external antennas of
mobile phone stations. (Avoid installing the
repeater near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a repeater location is not
satisfactory, move the repeater to another
location for better reception.
5

Advertisement

Table of Contents
loading

Table of Contents