Table of Contents
Advertisement
3 Select DISPLAY MODE, using
navigation buttons , then press ENTER.
Display mode options will appear.
•
DISPLAY
QUIT
SCREEN
Select display mode.
DISPLAY
CHANNEL
DISPLAY
CLOCK
DETAIL
4 Select the desired display mode using
navigation buttons, then press
o o / p p
ENTER.
The display mode will be set.
•
DISPLAY
QUIT
SCREEN RATIO
DISPLAY MODE
CHANNEL
DISPLAY
CLOCK
DETAIL
o o / p p
LETTERBOX
ZOOM
FULL
4:3
LETTERBOX
Advanced Operation
NOTE:
You can choose the display mode as you prefer.
Refer to "INFORMATION on Screen Ratio and
Display Mode" on page 58 for further information.
5 Press SETUP to exit SETUP menu.
CAUTION:
If the TV is left in LETTERBOX or SIDEBAR for a
long period of time, the still image may cause a burn-
in effect damaging the TV screen.
INFORMATION on 4:3 TV
When your 4:3 TV (capable of receiving a 1080i
signal) with the screen ratio 4:3 receives a 1080i
video output signal from STB, black/gray bars
may appear at the top and bottom of the screen.
That is because STB has been set to the screen
ratio to 4:3 and the display mode SIDEBAR.
appear because of TV settings.
1080i video
output signal
STB
appear because of STB settings.
We recommend setting the STB screen ratio to
16:9, then setting the display mode as prefered,
or changing the resolution selection switch on
the rear panel of the STB to "480p" or "480i."
4:3 TV
57
EN
EN
EN
EN
EN
EN
Advertisement
Table of Contents
