Advertisement
Quick Links
Installation Instructions
Model OMM-2
Output Master Module
INTRODUCTION
SIEMENS
INSTALLATION
(Refer to Figures 2, 3, and 4)
Remove all system power before installation, first the battery and then AC.
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
P/N 315-092699-5
Fire Safety
OMM-2 Module
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
Figure 1
Advertisement
Related Manuals for Siemens OMM-2
Summary of Contents for Siemens OMM-2
- Page 1 (Refer to Figures 2, 3, and 4) Remove all system power before installation, first the battery and then AC. Figure 1 OMM-2 Module Siemens Building Technologies, Inc. Siemens Building Technologies, Ltd. 8 Fernwood Road 2 Kenview Boulevard Florham Park, New Jersey 07932...
- Page 2 (Refer to Figure 2) To assign the plug-in cards to the OMM-2: To mount the OMM-2 card cage: vertically vertically To mount the OMM-2 in an MME-3 or MLE-6 backbox: Figure 3 Mounting the OMM-2 Board on the MBR-MP Mounting Plate...
- Page 3 ZC2-4AB 315-091262 ZC2-8B 315-092116 ZC3-4AB 315-092089 ZCT-8B 315-092105 Figure 4 Mounting the OMM-2 Board in the MSE-3L Enclosure CAUTION WIRING (Refer to Figures 5 and 6) All wiring must comply with national and local codes. +24V RET. For additional information on the MXLV System, refer to the MXLV Manual, P/N 315-092036.
- Page 4 Figure 5 Wiring the OMM-2 Figure 6 Wiring MOM-4s and OMM-2s in an MLE-6 Enclsoure P/N 315-092699-5...