Getting Started; Turning The System On; Resetting The System - Alpine INE-W970HD Owner's Manual

Getting Started

Components and Features
INE-W970HD
⑦
①
②
③
④
⑤
⑥
Sound Settings key
〇①〇
Displays the [Tone/Fader/Balance] settings screen.
〇②〇 or VOICE key
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
(NAV) key
〇③〇
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to
Go Home route screen. (If Home is not set yet, it will change to
the Home setting screen.)
For details of navigation operations, refer to "Navigation System
OM (Owner's Manual)" in the CD-ROM.
Recalls the connected smartphone's map screen.
Depending on the smartphone, this function may not be available.
MENU or (Power Off) key
〇④〇
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the power off.
(AUDIO) or (MUTE) key
〇⑤〇
Displays the Audio/Visual screen.
When pressed and held, mutes the volume.
〇⑥〇 + / − key
Press to adjust the volume.
〇⑦〇 Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 metres.
〇⑧〇 Disc insert slot
Inserts/ejects discs
〇⑨〇 RESET switch
The system of this unit is reset.
8
-EN
⑧
⑨
Turning Power On/Off
Some of this unit's functions cannot be performed while the vehicle
is in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example,
if the unit is in radio mode when ignition is turned off, it will
remain in radio mode when ignition is turned back on.
2
Press and hold the MENU/ (Power Off) button for
more than 5 seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.

Turning the System On

With the Alpine system, the home screen is displayed automatically
when the ignition key is turned to ACC or ON.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 9 languages.
• Some of this unit's functions cannot be performed while the
vehicle is in motion. Be sure to stop your vehicle in a safe location
and apply the parking brake before attempting these operations.

Resetting the System

Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press the RESET switch with a ballpoint pen or
similar pointed object.