Play; Power-On/Auto Standby/Auto Wakeup - JBL Bar 5.1 Surround Owner's Manual

2. Follow the Step 3 under "Connect a Bluetooth device".
• If the device has ever been paired with the soundbar, first
unpair "
NOTES:
− The Bluetooth connection will be lost if the distance between the
soundbar and Bluetooth device exceeds 33 ft (10 m).
− Electronic devices may cause radio interference. Devices that generate
electromagnetic waves must be kept away from the Soundbar, such
as microwaves and wireless LAN devices.
10
" on the device.

6. PLAY

6.1 Power-on/Auto standby/Auto wakeup

2
POWER
2 1
Switch on
1. Connect the soundbar and subwoofer to power by using the
supplied power cords.
→ The screen on the soundbar shows "
".
2. On the soundbar, press
→ "
" is displayed.
→ The subwoofer is connected to the soundbar automatically.
turns solid white.
Connected:
NOTES:
− Use the supplied power cords only.
− Before connecting to power, make sure that you have properly plugged
the power cords into the soundbar and subwoofer.
− Before switching on the soundbar, make sure that you have completed
all other connections (See "TV connection" and "Digital device
connection" in the "Connect" chapter).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. "
subwoofer also goes to standby, and
Next time you switch on the soundbar, it returns to the last
selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
• the soundbar is connected to your TV through the HDMI
ARC connection and your TV is switched on;
POWER
1
3
HELLO
" and then, "
to switch on.
" is displayed. The
turns solid amber.