Midland WR120 Owner's Manual

WR120 Owner's Manual
Quick Start Instructions:
1. Set the ON/OFF switch located on the right side of the radio to the ON position.
2. Pull out antenna and extend to its full length.
3. Insert 3 AA batteries (not included).
4. Plug the AC adapter into the POWER jack on the back of the radio and the other
end into a standard wall outlet.
5. Follow the prompts on the display screen using ▲ and ▼ to move through the
options and SELECT to choose the desired option.
• The radio will first display WELCOME, and then SET LANGUAGE.
• To SET LANGUAGE press the SELECT button:
- Choose your language by pressing ▲ or ▼, then SELECT.
• To SET LOCATION press the SELECT button:
- Press ▲ or ▼ until SINGLE is displayed, then press SELECT.
• To SET COUNTRY press SELECT to program your country for position 01:
- Press ▲ or ▼ to choose your country, then press SELECT.
- Press ▲ or ▼ to choose your state or province, then press SELECT.
- Press ▲ or ▼ to choose your county or area, then press SELECT.
• To SET TIME press the SELECT button:
- Set the time using ► ▲ ▼ and ◄ then press SELECT.
• To SET CHANNEL press the SELECT button:
- Tune the channel to the desired broadcast using ▲ or ▼.
• To SET VOLUME press the VOLUME UP or VOLUME DOWN buttons.
6. To complete set-up, press the SELECT button.
Directional
Pad
Menu
Select
page 1
ON/OFF
Switch
Volume
Up
Volume
Down
All Hazards
,
NOAA National Weather Service
s TM
midlandusa.com