Stand Dms160; Ec-Declaration Of Conformity - Husqvarna DMS 160 A Operator's Manual

Stand DMS 160
Height, mm
DMS 160 A height, mm
DMS 160 AT height, mm
DMS 160 Gyro height, mm
Stroke, mm
Max. drill bit diameter (mm)
Weight, kg
DMS 160 A
DMS 160 AT
DMS 160 Gyro
Tool kit DMS 160 AT
Tool kit DMS 160 Gyro
Weight, kg (extra accessory)
Vacuum plate
Water collector
Extension module l
Extension module U
Expansion attachment

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that drilling machine and
stand Husqvarna DMS 160 drill motor, DMS 160 A/AT/Gyro from 2010's serial number and onward (the year is stated in plain
text on the type plate plus a subsequent serial number) conform with the regulations in the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
• of December 12, 2006 "relating to electrical equipment" 2006/95/EC.
The following standards have been applied: EN ISO 12100:2003, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-3-2:2006,
EN 61000-3-3/A1/A2:2005, EN 12348/A1:2009.
Göteborg December 29, 2009
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
18 –
English
TECHNICAL DATA
840
900
1900-3100
600
120
10,5
12
31,4
0,3
0,8
2,5
0,7
2,9
2,9
0,8